Drying
  • Vibratory Drying Machines
  • Belt Dryers
  • Centrifugal Drying and Degreasing Machines
  • Vibratory Drying Machines

    Vibratory Drying Machines are used for drying components/parts, after the vibratory finishing process. Round dryer is filled with drying media (corn maize of various sizes). Wet parts are loaded continuously into the machine and get dry in pre-heated drying media.

    The moist which is on the surface of the parts are absorbed by granules and parts go out of the machine 100% dried. Dryers with pressured hot air are used for one cycle drying of parts. Drying after polishing process improves polishing level of the surface.

    We also have step dryer which works with hot air instead of granule. The parts with complex geometry which causes granule get stuck can be dried at this machine.

  • Vibratory Drying Machines / 489 Kb. 
  • Belt Dryers





    Kromas belt dryers are used for drying of large and small parts that are prone to damage. Parts that have many holes of different sizes and heavy parts are ideal for this type of machine. Drying is achieved by temperature controlled hot air which is recirculated in drying chamber. The machine can be equipped with air jets to blow off water that remains on part surfaces.
     

  • Belt Drying Machines / 142 Kb. 
  • Centrifugal Drying and Degreasing Machines




    Kromaş SK 25 liter and SK 50 liter machines are used for the processes which maize granules can’t be used. The parts are dried in centrifuge system by the hot air that comes from heating elements on the top side of the machine. Hot air is suctioned with a propeller placed at the bottom of the machine and this way hot air goes through the parts and as a result maximum efficiency is achieved.

     
  • Centrifugal Drying and Degreasing / 158 Kb. 
  • © 2019 Kromaş Metal ve Makine San. Ltd. Şti. All rights reserved!
    © 2019 Kromaş Metal ve Makine San. Ltd. Şti. All rights reserved!